with LoRa Thing Plus - expLoRaBLE-NM180100 System in Package(SiP)-Ambiq Apoll...

Description: The expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrated LoRa module supporting both 868MHz and 915MHz bands and worth with Bluetooth Low Energy. On top of all else, the expLoRaBLE Thing Plus utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system! The NM180100 SiP includes a Semtech SX1262 LoRa module paired with the Apollo3 MCU, which is used in the Artemis Module. This provides the board with compatibility in the Arduino IDE, through our Apollo3 Arduino core. With both the BLE and LoRa capabilities of the expLoRaBLE you will be able to operate as with Bluetooth enabled works with LoRa node. You won't have to worry about how to hook up an appropriate antenna, either. The expLoRaBLE Thing Plus has been equipped with a simple U.FL connector. With the U.FL you will have your choice of BLE and RF antennas to chose from but, personally, we recommend our Wide Band 4G LTE Internal FPC Antenna. The Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong. A Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrated LoRa module supporting both 868MHz and 915MHz bands and Bluetooth Low Energy. On top of all else, the expLoRaBLE Thing Plus utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system! Features: Operating Voltage: 3.3V (regulated from 5V USB-C supply), Battery charging circuit (500ma charge rate), u.FL Antenna Connector - BLE & RF, 24 GPIO, Qwiic Connector for I2C, with "The Things Network" LoRaWAN NM180100 SiP KEY SPECIFICATIONS: with LoRa: 863-870 MHz (Europe), 902-928 MHZ (US), Maximum Transmit Power +22 dBm, Receiver Sensitivity -147.6 dBm. with Bluetooth 5 Low Energy: 2.402-2.480 GHz, Maximum Transmit Power +2 dBm, Receiver Sensitivity -95 dBm. NM180100 SiP KEY SPECIFICATIONS: Architecture: Ambiq Apollo3 ARM Cortex with FPU up to 96MHz, works with Arduino IDE through Apollo3 Arduino Core, Flash: 1MB on-chip with external flash support, RAM: 384 kB. : ISO 7816 secure interface, Secure Key Storage, Secure Boot, Secure OTA, External Flash Inline Encryption/Decryption

Price: 78.34 USD

Location: Hawthorne, New Jersey

End Time: 2024-12-18T10:24:55.000Z

Shipping Cost: 0 USD