Description: Compatibility should be checked and confirmed before placing order!Steps of confirming the compatibilities:Manage "My Garage", and chose the right one when placing order;Or chose the "Year/Make/Model/Trim/Engine" of your vehicle on the compatible chart;Or Contact us if you have any question in confirming the compatibility, to make sure you will get the right and compatible item. SpecificationFeatures: Curved Blade,Durability TestedUniversal Fitment: NoType: Radiator Cooling Fan AssemblyCondition: NewManufacturer Warranty: 1 YearPackage Weight(lbs): 8.02Package Dimensions(LengthxWidthxHeight:inch): 23.94*17.32*4.8Item Weight(lbs): 6.39Item Size(LengthxWidthxHeight:inch): 23.94*17.32*4.8OE Number: 25380-1R050,HY3115136RPM Rating: 1300-1900Amp Draw: 10-12.5Working Life: 4000 hoursVoltage: DC 12VPlug Pin: 3Blade Type: CurvedBlade: 7Package Include: 1* Engine Radiator Cooling FanUnit: 1Material: Copper,Iron,PlasticColor: Black Fitment2012-2013 Hyundai Veloster2012-2013 Hyundai AccentFeatures & Benefits1. Cooling: The radiator cooling fan helps to cool the radiator effectively. Regular inspection and cleaning of the radiator can help improve performance.2.High quality:Made of high quality material to provide the best flow rate, has good heat and corrosion resistance and long service life.3. Performance: Effective heat dissipation and improved engine efficiency.4. Perfect fit: direct replacement of OE's motor, ensuring drop-in precise fit.5. Advantage: The radiator fan assembly is designed, developed and validated to meet original equipment (OE) requirements to ensure product durability and quality. The assembly is also designed to reduce noise during operation to ensure a quieter environment.6. Vehicle testing: Testing on applicable vehicles prior to market release provides seamless integration of the control module and brushless unit.7. Warranty Issues: The radiator cooling fan has a 1 year warranty. Please contact us with any questions before or after purchase. 24 hours for friendly reply.Note:The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan. Step 1: Locate the Radiator Cooling FanLocating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself. Step 2: Disconnect the Power SupplyOn the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later. Step 3: Remove the Fan HousingUsing a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well. A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table. Step 4: Remove the Radiator Cooling Fan and the Fan MotorThe fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver. Step 5: Attach the Replacement Radiator Cooling Fan and Fan MotorInstall the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.
Price: 46.63 USD
Location: Ontario, California
End Time: 2024-10-14T03:06:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Brand: AutoHai
