LOTUS TWINCAM ENGINE BOLT KIT LOTUS TWINCAM ENGINE FASTENING KIT LOTUS TWIN CAM

Description: LOTUS TWIN CAM EXTERIOR 204 PIECE ENGINE REBUILD KITSUITABLE FOR ALL LOTUS TWIN CAM ENGINES 1962 - 1974.ALL NUT'S,BOLT'S ,WASHER'S AND FASTNERS ARE 8.8 GRADE HIGH TENSILE STEEL . AND ARE ZINC PLATEDTHE KIT IS FULLY PACKED AND LABELLED.THE KIT CONSIST'S OF THE FOLLOWING.1/ CAM /VALVE COVER SEALING KIT, INCLUDING THE RUBBER COATED STEEL LOCK WASHER'S. ( 24 ITEM'S )2/ EXHAUST AND INLET, INCLUDING BRASS EXHAUST NUT'S. ( 16 item's )3/ FAN TENSIONER & NUT..( 13 ITEM'S ) Please note that on some MK2 Lotus Cortina Engines there is a aluminium spacer plate between the fan blade and the pulley and you will need a longer bolt , please check and request longer bolts when you place a order4/ CLUTCH COVER. ( 12 item's )5/ ENGINE & REAR HOUSING MOUNT'S. ( 24 items ) *** SEE NOTE BELOW6/ SUMP PAN. ( 54 item's )7/ OIL PUMP, FUEL PUMP,THERMOSTAT,H/COVER'S,FRONT COVER'S.( 18 item's )8/ COMPLETE FRONT ENGINE & WATER PUMP COVER'S ( 32 item's )9/ ALT/DYN BRACKET & FRONT PULLEY. ( 8 item's )10/ ENGINE BLOCK CORE PLUGS. ( 3 item's ) early kit is shown in the photograph , suitable for pre-crossflow and " L " block's ( 122E, 6015, 120E, 2731, 681 F, EARLIER 701M, 2737E. ) **** SEE NOTE BELOW **** PLEASE NOTE THIS KIT COMES WTH THREE CORE PLUGS AS STANDARD FOR THE BLOCKS LISTED ABOVE, ON REQUEST I WILL SUBSTITUTE ONE OF THE PLUGS FOR ONE LARGER PLUG IF YOU ARE USING A CROSS FLOW/ AX TYPE BLOCK.**** if you are using a 711 M (tall )BLOCK ,THE AX BLOCK OR THE LATER 701 M BLOCK, please let me know when you buy , and i will swap the core plug kit around to suit. *** PLEASE NOTE***THE ENGINE MOUNTING BOLTS IN No 5 does not take into consideration the four longer bolts needed for lotus elan models so please let me know if this kit is for a elan and i will substitute 4 bolts for the 4 longer ones .THE ELAN KIT HAS FOUR OF THE STANDARD LENGTH BOLTS AND FOUR OF THE LONGER LENGTH BOLTS BECAUSE OF THE ENGINE MOUNTING SPACERS ON ONE SIDE OF THE ENGINE THE ENGINE SPACER PLATE IS 1 and 1/8th inches thick and( 1 1/8th inch ) THE WEIGHT OF THE KIT IS 1.25 kilo's SUITABLE FOR THE BOTTOM END OF PRE X-FLOW BLOCK, 711M X-FLOW BLOCK, AX BLOCK AND ALL LOTUS BLOCKS INCLUDED IN THE QUOTED POSTAGE AND PACKING PRICE IS THE COST OF TWO NEW PADDED ENVELOPES ( 75p each ) I PACKAGE WELL , I HAVE NEVER HAD A BURST PACKAGE OR BITS FALLING OUT OR LOST. PLEASE LEAVE FEED BACK SO I KNOW YOU HAVE RECIEVED YOUR KIT IN ONE PEACE AND THAT YOU ARE HAPPY WITH IT, I WILL THEN LEAVE FEED BACK FOR YOU.

Price: 59.95 GBP

Location: Stoke-on-Trent

End Time: 2025-01-20T09:46:34.000Z

Shipping Cost: 36.9 GBP