Goshen Stamping Right Hand DLB1200A Winch with Crank Handle for Pop-up Campers

Description: Save BIG on our specially priced Goshen Combo Pack! What you get: (1) Goshen Stamping Right Hand DLB1200A Pop Up Tent Camper Lift System Winch and (1) Goshen Stamping Pop Up Camper Crank Handle The Goshen Stamping Right Hand DLB1200A Pop Up Tent Camper Lift System Winch is a replacement winch for pop up tent campers that use a Goshen Stamping push spring style roof lift system. This is the right hand winch assembly complete with crank handle extension hub. 1200 pound Dutton Lainson Brake winch. The product may be silver or black in color. Since 1976, Goshen Stamping has made the most popular lift system for Pop Up Tent Campers. The system is easy to install, maintain, and repair if necessary. Only one cable is used to operate the push spring system and it is operated by a Dutton Lainson DBL1200A brake winch. You can identify if you have the Goshen lift system if your winch is mounted on the tongue of the camper and you have only one cable running underneath to a pulley in the back. This winch has been used on many pop up campers. Please double check this is the correct winch for your application. The chart below is used for reference only! Camplite / Damon (Since 1993) Dutchmen (1993-2003) Forest River (Since 1993) Palomino (Since 1987) Rockwood / Flagstaff (Some models since 1994) Skamper (Since 1977) Starcraft (1993-2008) Sunlite (1987-1994) Sylvan Sport (Since 2008) Van American / Cobra (1989-1990) Viking (1995-2012, 2018-Current) Goshen Stamping Pop Up Camper Crank Handle Dimensions: Handle Length: 4-1/4 inches End of Handle to Elbow: 9-7/8 inches Elbow to Socket End: 12-1/4 inches Interior Socket Width: .725 inches (roughly 11/16") Exterior Socket Width: .845 inches (roughly 7/8") Q & A: Question: What keeps your winch from free spooling when letting the top down ? Answer: The following are the operating instructions that come with this winch: "Wind cable on winch reel by turning the winch handle in clockwise direction. This should produce a loud, sharp, clicking noise. The load will remain in position when the winch handle is released. Wind cable off the winch reel by turning winch handle counterclockwise (no noise will be produced). The load will remain in position when handle is released, but for extra security it is recommended that the handle be turned clockwise until at least 2 clicks are heard. This will add extra tightness to the brake mechanism. Always satisfy yourself that the winch is holding the load before releasing the winch handle." To answer your question directly, you have to keep your hand on the handle and back it down slowly (do not let go). The load is supposed to remain in position when you release the handle unless you have a worn out winch, but there is still a brake mechanism that you can engage by turning the handle clockwise 2 clicks for extra tightness and piece of mind.

Price: 169.99 USD

Location: Oak Creek, Wisconsin

End Time: 2024-09-01T16:32:42.000Z

Shipping Cost: N/A USD