E-Flight Super Cub 25 e model airplane RC ARF

Description: This has never flown. I completedalmost all of the build—I did not install the optional lighting kit. I’d recommend you go through theAssembly Manual, step-by-step to be certain that everything is properly mountedand tightened. The Velcro strips holdingthe ESC and other parts may need replacing as the sticky may be gone. The plane will need to be balanced for center of gravity and adjusted forcontrol throws before flying. Included in build and my cost: EFLM4032A Power 32 BrushlessOutrunner Motor, 770Kv $87 EFLA1060 60-Amp ProSwitch-Mode BEC Brushless ESC $65 APC13065E 13 × 6.5E ElectricPropeller $3 SPM8800 DX8 DSMX 8CH $200 EFLA110 PowerMeter $30 EFLC3020 Celectra 200W DCMulti-Chemistry Battery Charger $90 EFLSP200 2-inch AluminumSpinner with 4mm and 5mm Collets $15 SPMAR7010 AR7010 7CH DSMX™Receiver $50 SPMSA5030 A5030 Mini DigitalAircraft Servo (6) $40ea = $240 SPMA3051 6-in (152mm) ServoExtension (2) (Aileron wing extensions) $4ea SPMA3052 9-in (229mm) ServoExtension (ESC extension) $6 SPMA3053 12-in (305mm) ServoExtension (2) (Aileron to fuse extensions) $4ea SPMA3050 3-inch (152mm) ServoExtension (Bind plug extension) $4 SPMA3058 Standard Y-Harness(Receiver to flap fuselage extension) $9 So, the hardware cost is about $800 plus the price of the plane itself. I'd be good with $500. thanks so much. peter

Price: 500 USD

Location: San Anselmo, California

End Time: 2024-12-06T18:25:43.000Z

Shipping Cost: 0 USD