DINITROL PUR-505 Primerless Automotive Urethane / 310ml Case of 12

Description: DINITROL PUR-505 Primerless Automotive Urethane / 310ml Case of 12 SKU: DINITROL PUR-505 310ml Case October 14 2024 MSRP: $103.99 Brand: Dinitrol Condition: New Package Quantity: 12 Part Number: PUR-505 310ml Product is dated with best if used by October 14 2024PUR-505 can also be used with Dinitrol 538 Plus multifunction black primer for superior adhesion and 100 % UV blocking on all OEM and Aftermarket vehicle glass.PUR-505 is a one component cold applied, nonconductive urethane adhesive system.Important Notes: Glass installation is not recommended at temperatures below 5 C (40 F) unless proper procedures are followed as stated in the DINITROL AGR Training Manual under Adverse Weather Conditions Section. Adhesives such as DINITROL 9100 or DINITROL 9000 should be used in these extreme temperatures unless glass is replaced in a heated shop an allowed to remain there until the appropriate Safety Drive Away Time as listed on the product TDS sheets have been met. *For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.2 tubes of urethane required for most windshield or back glass installations. 1 tube for most other glass installations.This product requires a 26:1 thrust ratio caulk gun or better to properly dispense. RH/TEMP 70% 50% 30% 10% 85F (30C) 3 hrs 3 hrs 3 hrs 8 hrs 73F (23C) 3 hrs 3 hrs 4 hrs 10 hrs 60F (15C) 3 hrs 3 hrs 5 hrs 16 hrs 50F (10C) 5 hrs 5 hrs 12 hrs 24 hrs 40F (5C) 9 hrs 9 hrs 18 hrs 30 hrs * Application at or below 40F is Not Recommended*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product.The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product.The buyer understands that by purchasing this product to use themselves without the use of a professionalas recommend by the seller and manufacturer serious injury or death may result.* Benefits: - Primerless to Glass - High Viscosity - Excellent Working Time - Good Decking - Fast Curing - Short cut-off String - High Elasticity - Crash Test Proven to FMVSS Directions: This urethane doesn't requires the use of DINITROL 538 PLUS Primer, this is a primerless urethane. Manufacture always recommends safe practices to apply a primer or activator prior to installing a windshield. All bonding areas must be clean, dry and free from all contaminates like oil, grease, release agents, etc. If there is no existing urethane on the pinchweld to use as a substrate, apply 538 to the pinchweld bonding area. Method of use: The application of the DINITROL PUR-505 is done by extrusion out of cartridges/tubes. Requires power caulking gun or 26:1 thrust ratio to properly dispense. Product has very high viscosity and can not be dispensed without proper equipment. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications. Fast Curing times Safe Drive Away Time - 3hr+ depending on temperature and humidity - check description for exact cure times. (12) 310ml tube/cartridges. Require cartridge style caulking gun to dispense. PAYMENTS We are a PayPal-certified seller and we accept all major credit cards. DOMESTIC SHIPPING We offer free shipping on most of our items within the continental USA. Shipments to Alaska, Hawaii, Puerto Rico and other U.S. territories may not be eligible for free shipping. INTERNATIONAL SHIPPING International shipments and shipments going outside of the continental USA may require 2-3 days prior to shipment. Our parts are designed for USA production models and may not cross fit for worldwide applications. Buyers are responsible for confirming international applications prior to purchasing. RETURNS If there are any issues with your order please contact us prior to returning any parts. We are happy to help correct any problems. Buyers are responsible for return shipping costs, unless the error was on our end. We are set up with Ebay returns, which should be used to process and print a return label. Returns will be accepted within 60 days. Orders must be returned in original packaging and in re-sellable condition. If the item shows any sign of wear or damage no refund will be issued. Orders must be returned in original packaging and in re-sellable condition. If the item shows any sign of wear or damage no refund will be issued. The Vehicle Compatibility chart should only be used as a guide and does not confirm all possible options that may be available for your vehicle. Due diligence is the responsibility of the Buyer to confirm that the part(s) they order are correct, using the information provided within the Seller's details. When in doubt, it is highly recommended to ask questions prior to ordering. We are happy to help in any way we can.

Price: 62 USD

Location: Sykesville, Maryland

End Time: 2024-11-11T19:59:07.000Z

Shipping Cost: 0 USD