Dental Light Cure Composite Resin/Flowable/Dual Core Buildup/ Etch Gel /Adhesive

Description: Description: INDICATIONS FOR USE:Direct restoration for all class caries.Restoration of teeth defect and veneer. Package:Light Cure Composite: 4g/Syringe*5（A1 A2 A3 A3.5 B1）Syringe Needles : 5pcs/ box*1Total Etching Adhesive: 5ml/Bottle*1Etching Gel: 5ml/Syringe*1Applicators Brushes: 20pcs/box*1Net weight: 188.4g COLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES:Unique dispersion technology ensure the filler evenly distributedRadioopaque and fluoride releasing Optimal polishability and high shade stability.Excellent handling, not sticky to instrument;Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS：(1)Preparation: isolate and prepare tooth.(2)Cleaning: rinse the preparation with water.(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.(4)Applying Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.(6)Applying light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.(7) Finishing: after light cure, adjust restoration.(8) Polishing: use polishing strip or disc to polish the surface WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. STORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. DISPOSAL:After the product is used up, dispose it as normal medical rubbish. & DX.FLOW A1 A2 A3 Description: 1. Medium Flow: Small, shallow cavity restorations; base/liner under restorations. 2. Liner, flexible reduce the occlusal stress. Advantages: 1. Excellent polishing feature and strength. 2. Radiopaque. 3. Fluoride releasing. Color Available: A1, A2, A3 Package： Syringe*3g Tip*5 English operation manual & DX.CORE DESCRIPTIONDual CureExcellent flow consistencyHigh flexural strengthHigh compressive strengthDual cure (light and self cured)It is light cured in a few secondsShade:A2/ A3Packing:1X 8.0g Syringe5 X Mixing Tips5 X intraoral Tips & DX.Etch 37% Denterx etching gel is a polymer thickened gel for use on enamel and dentin. This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue. Packages: Refill: 5 ml/syringe, Instruction X1, totally 10pcs Indications:Treat dentin and enamel, Treating agent on dental restorative material. 1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. 2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application. Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. 3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. 4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive & DX.Etch HF 9.5% Description: 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.It is used on ceramic based crown,veneer,inlay and onlay.It can roughen the surface of porcelain and enhance the bonding strength. Packages: 2.5 ml/syringe 3X Disposable Tips Instruction Warning: Protective measures must be taken by patient,operator and assistant. Don’t use this product until you have thoroughly read and understood the instruction. & Light Cure Bonding Resin Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. & Total Etch Light Cure Adhesive Description: 1. 5th generation adhesive for all classes of direct restoration. 2. Post and core bonding. 3. Ceramic veneer/crown/inlay and other indirect restoration bondings. Advantages: 1. High bonding strength and long lasting durability. 2. Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity. 3. Compatible with all light cure restoratives. 4. Time saving and easy to use. Usage: 1. Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive. 2. Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive. Package:5ml/Bottle & DX.Temp Bule Description: Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions. Light curing composite resin in adequate release to be directly discharged to the dental cavities through disposable tip for easy apply. No easily deviation till dental prosthetic installation Singly and wholly removed No dentritus inside dental cavities after removal Excellent sealing ability adhesive to the side of dental cavities Easy checks for leftover after removal Elasticity allows masticatory some degree Applications: Temporary restoration for inlay, on lay cavity Temporary obturation of implant screw access canals. Blocking temporary sealing，Excellent sealing ability. The filling color is blue Expires in 3 year Temporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material. 1.RECOMMENDED USE Temporarily fill the cavity (1). Preparation, relining and impression taking are done as usual. (2). Clean and dry the cavity. (3). Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument. (4). Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers. (5). Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs. Removal of the temporary inlay (a). Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece. (b) Clean the cavity with a rubber cup/a small brush and cleaning paste. 2.Composition Inorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives. Free from methyl methacrylate and peroxides. 3.Technical specifications Shore-D hardness≥40 Packing list: 2.5g Syringe 5 Tips Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Payment We accept PayPal only.（The address in your paypal details will be used as the actual shipping adress, please make sure the adress is correct.） If you are planning on combining your items, please make sure that you wait until ALL auctions have ended before you visit the checkout. All items must be paid within 7 days. Feedback You feedback is VERY important to us! Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Returns Exchanges are offered for items that are defective or damaged when received, although this is highly unlikely. After exchanges are made and have not resolved the issue, we will refund the cost of the merchandise. Defective items or problems with your order must be reported within 3 days after receiving. Please keep all packaging, documentation, packing list, etc. that came with your order. These will be used to verify claims if there is any problem with you. Restocking fee will be charged for returned items without original package or any quality problem.Please contact us for details before returning your package to avoid misunderstanding. IMPORTANT: Customer's item must be returned to our facility with the ROF (Return Order Form) at the buyers' shipping expense. Contact Us Serivce is our #1 priority at Dentistclub! If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at Dentistclub. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right! FDA Statement FDA Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.Seller name:DentistclubCity,State:SHENZHEN,ChinaTelephone number:0755-3889136

Price: 7.03 USD

Location: Fullerton, California

End Time: 2025-02-15T07:12:55.000Z

Shipping Cost: 0 USD