DC 12V-30V PWM To Voltage Converter Module 0%-100% PWM to 0-10V Conversion Range

Description: Product Description If you have any questions, please contact customer service first, do not open disputes easily, thank you! Description:The PWM to voltage converter module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM. The modules are small in size and easy to use in different places. Features:MCU embedded technology.Easy to operate, fine tuned by potentiometer.Select the PWM signal input level range through short-circuit.The module is smaller, easy to carry and use. Parameter:Work Voltage: DC 12V-30V; (> 100MA)PWM Receiver Frequency:1KHZ-3KHZPWM signal input level range:The peak of 4.5V to 10V level. The short cap install in "5V". This level is used for normal controller or 5V MCUThe peak of 12V to 24V level, so inserted in 24V. The short cap install in "24V". This level is used for normal PLC controllerConversion range: 0%-100% PWM to 0-10VAllowable error:5% Hardware Interface:VCC DC 12V-30VGND GroundPWM Positive of PWM input signalGND Negative of input signalVOUT Output Voltage 0-10VGND Output Voltage Ground Operation instructions:After power on, without input signal, the output is 0V, so only input can output.The first time when the power is on, it is best to do a calibration debugging: Input a 50% duty ratio signal to PWM/GND and adjust the relative amplitude short cap. The frequency is 1KHZ-3KHZ, Measured VOUT and GND with a multimeter and it will display 5V. Adjust potentiometer to make sure display 5.00V on multimeter. This will calibrate your pulse signal to this module.When the frequency changes, the correspondences may be offset and need to be re calibrated.The output voltage can be adjusted by adjusting the duty ratio.The accuracy can be controlled by adjusting the potentiometer.Package list:1* PWM to Voltage Converter Module Payment We accept paypal payments and all payments authorized by eBay. Shipping 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. 2.Items will be shipped within 1-3 business day when we received payment. 3.Delivery time depends on destination and other factors Returns In the unlikely event that a return is request, all returns must include all original items undamaged, In re-saleable condition, all original packaging including manuals, warranty forms, etc. Software sales are not refundable. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back powered by

Price: 7.72 USD

Location: KEARNY, NJ

End Time: 2024-09-01T10:01:51.000Z

Shipping Cost: 0.49 USD