Description: R134A QUICK COUPLER Brass R134A low pressure side straight quick coupler, features with quick interface, accurate snap push to lock, anti-slip knurled grip ring, internal ball bearings, 1/4" male flare connector with dust cap PREMIUM REFRIGERANT CHARGE HOSE Rubber nylon resin material hoses, anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI, with brass 1/4" female fittings and R134a can tap on each side ACCURATE LOW PRESSURE GAUGE Dual pressure unit, with scale range -30inHg~250PSI -76cmHg~17.5kg/cm². Screw-on gauge screen, built in calibration screw, no-flutter pointer, metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A (not for R12 R22), Celsius unit R134A REFRIGERANT CAN TAP VALVE Brass can tap with 1/2" ACME female thread interface, can screw to fix on 1/2" ACME male thread of refrigerant bottle opening. T type knob, internal pin with sharp tip, easy to operate SPECIFICATION 1.Total length: 23" 2.Material: Rubber nylon resin hose and brass fittings 3.Scale range: -30inHg~250PSI, -76cmHg~17.5kg/cm² FITMENT TYPE Air conditioning: fits for all models with R134A suction service port Refrigerant can: Can with 1/2" ACME male thread bottle opening, self-piercing type NOTE 1.This AC charging hose kit is equipped with straight R134A quick coupler, some vehicles need 90° elbow coupler 2.Please confirm your AC system type and refrigerant bottle opening size before biding 3.Please wear gloves and goggles when use 4.The AC refrigerant recharge tool should be used by professional or under the guidance of a professional 5.Always refer to equipment manufacturer's operation instruction 6.Please ensure the AC compressor is working when measure pressure. Wrong readings will be caused by stop working compressor AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 23 inch, one side with R134a can tap, the other side with a brass 1/4 inch female fittings, which is used for R134A quick coupler directly. Refrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the automotive air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect. Can Tap: Brass can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Do not use the can tap as R134A cap, refrigerant is corrosive, if use this can tap as R134A cap for a long time, the inner rubber sealing ring will be corroded, then you will find it leaks Measure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can. Simple R134A Charging Tool: This air conditioning U hose gauge is very simple, only 23 inch long and equipped with a non-detachable gauge can tap. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port.
Price: 27.26 USD
Location: Brentwood, New York
End Time: 2024-12-14T13:52:23.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Size: 23 Inch
EAN: 0690770903924
ISBN: 0690770903924
Package Dimensions LxWxH: 5.67x4.29x3.58 Inches
Weight: 0.77 Pounds
Type: Does not apply
Brand: JIFETOR
