Description: -Welcome to Our Store- -Introductions- Voltage: 110V Rated Power: 1500W (Note: Working power changes as the heating element size changes) Illumination: LED Light Heating time: Continues up to 6 minutes. (From normal temperature to protection switch-off temperature) Heating capacity reference: Heating 10 bolts from 25°Cto 300°C. Recommended Heating Temperature : 200-700°C. Bolt Diameter: Φ10-22mm, Φ23-28mm, Φ29-36mm, Φ37-40mm Functions: Heating rusted bolt nut, by the purpose of fast and easy remove from machines, cars etc. Using the thermal expansion theory, when the nuts of the bolt is heat, it expands which makes it easy to be removed from rusted bolt. If you need to use this device to others applications, please contact local dealer for support, any inappropriate operation may cause damage to the device. Operation Steps: 1.Release the 2 fixing bolts contraclockwise 0.5cm out. 2.Select appropriate size of coil for your work and insert the two ends into the front holes. 3.Twist the bolts clockwise to fix the coil tightly. 4. Plug in and place the heating element in the center of the coil, then press & hold the red button, the light in front will illuminate in 2-3 seconds. 5. At the same time, the heating elements temperature raises, when work is done, release the button, and put it in safe storage. Use Rules: 1. This device is built in the over heat protection, it will shut itself off to prevent damage from overheat, you can use it after the temperature drop to normal . 2. Please try not to use it over 5 minutes one time, although the device is built in the over heat protection, however, life spam of the device may be reduced. 3. During use, please place the coil in the center of bolt/heating object, try not to reach or close to large metal part where you don’t need to heat), otherwise the working load increases and slow down heating speed of bolt. Please refer to Pic 4. 4. When the white coil insulation is breach, please replace with new insulation pipe, or replace the coil, if you have to use it, please not use it in the way of Pic 1, Pic 2. (Breach of insulation pipe may lead to short circuit of induction coil, thus may cause irreversible damage to the heater) 5. Do not block the vent holes during working, otherwise cooling ability decreases, and cause overheat to the device very soon. 6. Please dont put this device in fridge, near the air conditioner vent, this may cause condense water inside of the device and may damage the board. 7. Please don’t bend the power cord sharply, no matter in using or storage. 8. Please don’t open the device by yourself. Package includes: 1pc of Magnetic Induction Heater 4pc of Induction Coil 1pc of User Manual -Delivery-1. We Only Ship to USA, But we do not ship to APO/FPO, Please understand it.2. Orders processed within 24-60 hours of payment verification. (On Sunday is our rest day).3. Before buying, Please make sure your address is correct. If not, please correct it before payment.if you want me send the item to another address, please send me a message.4. If you have not received your shipment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!5. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.-Payment-1. We accept Payoneer.2. Payment must be received within 7 business days of auction closing.3. Please make sure your address is correct. If not, please correct it before payment. Thank you.4. Custom duties, taxes, or extra charges are not included in the cost you pay to us.5. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/ buying.-Return-1. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact us before you return it.2. Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.3. Return shipping is to be paid by the Buyer.4. We act as a responsible seller, we are willing to actively undertake the following responsibilities: a. The item is lost during transit, b. The item is damaged during transporting, c. Due to our mistake, deliver the wrong items to the buyer, d. The item in the actual use of the process of quality problems.-Contact US-1. Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.2. As an online seller, we collaborate with excellent international transport companies, we have our own warehouses, offering the most convenient delivery service possible. On-time shipping and reliable quality control are key areas of importance in our shop.3. If you have any question, please contact us:) -Enjoy your shopping-
Price: 249.99 USD
Location: Monroe Township, New Jersey
End Time: 2024-02-23T21:56:05.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Rated Power: 1500W
Type: Brake Bleeder
Brand: Unbranded
Manufacturer Part Number: Does Not Apply
Bolt Diameter: Φ10-40mm
Illumination: LED Light
Voltage: 110V